Ryobi P2500 - Manual (Page 12)

12 13
OPERATION
Fig. 8
LOWER PORTION
OF SHAFT
ADJUSTMENT
COLLAR
WARNING:
Battery tools are always in operating condition. Therefore,
switch should always be locked when not in use or
carrying at your side.
ADJUSTING THE SHAFT
See Figures 6 - 8.
n
Rotate the lower portion of the shaft adjustment collar to
the “Unlock” position.
n The lower shaft should now be free to slide down from
inside the upper shaft. Make sure the shaft is pulled out
to the desired position.
n Rotate the shaft adjustment collar to the “Lock” position
and tighten securely.
U
L C
L N
O K
Fig. 6
SHAFT
ADJUSTMENT
COLLAR
LOWER PORTION
OF SHAFT
ADJUSTMENT
COLLAR
TO UNLOCK
COLLAR
SLIDE OUT TO
DESIRED POSITION
Fig. 7
SHAFT
ADJUSTMENT
COLLAR
TO LOCK
COLLAR