Roland KCW-1 - Manual (Page 11)

11
Block Diagram
fig.50
Main Specifications
KCW-1: Powered Subwoofer
Rated Power Output
200 W
Nominal Input Level (100 Hz)
Input: +4 dBu (XLR type, 1/4” phone type)
Nominal Output Level (100 Hz)
Thru Out: +4 dBu (XLR type, 1/4” phone type)
* 0 dBu = 0.775 Vrms
Speaker
25 cm (10 inches) x 1
Controls
VOLUME Knob
CROSSOVER Knob
BOTTOM Switch
PHASE Switch
POWER Switch
GND LIFT Switch
Indicator
POWER
OPERATION
Connectors
INPUT Connector L, R (XLR type)
INPUT Jack L (MONO), R (1/4” phone type)
THRU OUT Connector L, R (XLR type)
THRU OUT Jack L, R (1/4” phone type)
FOOT SW Jack (1/4” phone type)
Power Supply
AC 117 V, AC 230 V, AC 240 V: 50/60 Hz
AC 220 V: 60 Hz
Power Consumption
135 W
Dimensions
438 (W) x 440 (D) x 460 (H) mm
17-1/4 (W) x 17-3/8 (D) x 18-1/8 (H) inches
Weight
23.0 kg
50 lbs 12 oz
Accessory
Owner’s Manual
Power Cord
Options
Pedal Switch: DP-2
Foot Switch: FS-5U (BOSS)
* In the interest of product improvement, the specifications and/or
appearance of this unit are subject to change without prior notice.
THRU OUT L
THRU OUT L
XLR
POWER AMP
SPEAKER BOTTOM
BOTTOM
VOLUME
MUTE PHASE
PHASE
CROSSOVER
CROSSOVER
THRU OUT R
THRU OUT R
XLR
INPUT L
INPUT L
XLR
FOOT SW
INPUT R
INPUT R
XLR
(MONO)
KCW-1_e.book 11 ページ ２００６年９月８日 金曜日 午前１１時５０分