ResMed Nasal Pillows System Mirage Swift II - Manual (Page 5)

Eng
lish
1
Mirage Swift
™
II
NASAL PILLOWS SYSTEM
Thank you for choosing ResMed’s Mirage Swift II Nasal Pillows System.
The nasal pillows system is light, flexible and quiet. It is designed to minimize
contact with your face, thus ensuring that you feel comfortable during therapy.
This user guide provides you with the information you need for the correct use
of your system.
Intended Use
The Mirage Swift II is intended for multipatient use by adult patients
(>30 kg) prescribed continuous positive airway pressure or bilevel therapy for
use in home, hospitals or clinics.
Note: The Mirage Swift II is not compatible for use with ResMed
AutoSet CS ™ 2 and VPAP ™ Adapt SV devices.
Medical Information
Note: The Mirage Swift II does not contain latex, PVC, or DEHP materials. If
you have ANY reaction to any part of the system, discontinue use and consult
your sleep therapist.
.
Warnings and Cautions
• This system should be used only with flow generators (CPAP or bilevel)
recommended by your physician or respiratory therapist. It should not be
used unless the flow generator is turned on and operating properly. The vent
holes should never be blocked.
Explanation of the Warning: Flow generators are intended to be used with
special interfaces with connectors which have vent holes (vent holes are
located on the frame—see section A on the illustrations sheet) or separate
exhalation devices to allow continuous flow of air out of the interface. When
the flow generator is turned on and functioning properly, new air from the
flow generator flushes the exhaled air out through the attached exhalation
60891 Eng.fm Page 1 Monday, September 22, 2008 9:57 AM