Renesas H8/338 - Manual (Page 13)

Fasten the user system interface cable head to the IC socket for an FP-80A package on the user
system with the four screws (M2.0
x 12 mm) provided. Each screw should be tightened a little at
a time, alternating between screws on opposing corners. Take special care, such as manually
securing the IC socket soldered area, to prevent the soldered IC socket from being damaged by
overtightening the screws or twisting the components.
User system
Pin 1
Cable head
IC socket
(IC149-080-017-B5
manufactured by
YAMAICHI ELECTRONICS Co., Ltd.)
Screws (M2 x 12 mm)
with flat washers
Figure 3 Connecting User System Interface Cable to User System
7