RCA 70-T19931-310 User Manual

Choose your connections, Connect a signal source, Start guide

Advertising
background image

START

GUIDE

Choose Your Connections

Quality

Connects to...

Cables needed

(not included)

Jacks

Devices with an HDMI or a

DVI output, such as HD

Receivers, Satellite Receivers,

and Cable Boxes

Devices with Y Pb Pr

(component) outputs, such as

HD Receivers, Satellite

Receivers, Cable Boxes,

DVD-PVRs, and DVD Players

Devices with S-Video or Video

outputs, such as DVD Players,

VCRs, Satellite Receivers, and

Cable Boxes

Component
Video

Audio

Audio

Audio

S-Video

Video

HIGH DEFINITION TELEVISION

INPUT 1

COMPONENT

Y/VIDEO

P

B

P

R

R

L

S-VIDEO

VIDEO

Audio

HDMI 1

INPUT

INPUT 2

COMPOSITE

R

L

HDMI

INPUT 4

COMPOSITE

R

L

Or if connecting to a DVI device, use these with an HDMI cable

DVI
Adapter

+

Make your connection decision easier by taking a few minutes to review the jacks on
your new HDTV. Compare the jacks on the device you want to connect and see if the
same jacks are available on your HDTV. Then refer to the chart below to determine the
best connection to make.

For more information about connecting your HDTV to other devices, refer to Chapter 1
of the User’s Guide. Make sure you read the safety information sheet provided seperately
before you connect and operate your TV.

Connect your regular cable to the TV’s ANTENNA/CABLE INPUT to receive analog
channels or connect an antenna to the TV’s ANTENNA/CABLE INPUT to receive off-air
local digital and analog channels.

Note: If you have regular cable, your TV is able to receive some digital channels (using
the ANTENNA/CABLE INPUT) because it has a capability called QAM. QAM is a tuner
that enables reception of unscrambled digital cable content. Check with your cable
provider for information about content availability in your area. Refer to Step 3,
Operate Your TV, for information on digital channels.

If you’re connecting a cable box or satellite receiver, use the chart above to help
determine which jacks to use for the best connection. Your cable box or satellite receiver
needs to be high definition if you want to receive high definition programming. Check
with your cable provider for more information.

Continue to Step 2, Set Up Your TV, on the back page.

RCA and associated marks are trademarks of THOMSON S.A. used under license to TTE Corporation.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

www.rca.com/television

Antenna

ANTENNA /

CABLE

TV back panel

Cable

(wall outlet)

or

Connect a Signal Source

Advertising