Rose electronic MultiStation - Manual (Page 12)

8 MULTISTATION PC INSTALLATION AND OPERATIONS MANUAL
Installing the Remote user module
(NOTE: Power to the computer should be off)
Connect the remote keyboard, monitor, and mouse to the
corresponding connectors on the remote user module. The local
computer’s keyboard, monitor, mouse, and other cable connections
such as a printer, scanner, or USB cables should already be connected
to the corresponding ports on the computer.
Figure 3. Remote user module
Connect the CAT5 cable from the Remote user module’s RJ45
connector to the RJ45 connector on the MultiStation PC’s PCI card.
Applying power
Turn on both the local computer’s monitor and the remote video
monitor and turn on the shared computer. Windows will automatically
recognize the MultiStation PC PCI card as new hardware and will
prompt you to install the appropriate driver. Continue installing the
drivers and after they are installed, re-start the computer when the re-
start computer prompt displays. This will load the MultiStation PC’s
driver.
Remote User Station