Radio Shack 49-2534 - Manual (Page 8)

8
5
'66+0)
"
6*'
"#
761
/5
9+6%*+0)
"
5
'37'0%'
You can install up to four cameras on four different channels
to monitor a series of rooms for maximum supervision of the
house (or office). The monitor can automatically switch
between the four cameras. To activate the auto-switch
function, you must set the dip-switches.
To cancel the auto-switch sequence and lock on one
channel, set the dip-switch for the channel you want to
receive to ON. Slide the others to
OFF .
/
10+614
"
61
"#18"
(70%6+10
The system’s monitor unit has audio/video outputs to
transfer the picture and sound from the monitor screen to a
TV for a large screen display. Connect the monitor’s
AUDIO/
VIDEO OUTPUT to a TV’s A/V input, or to a VCR to record
transmissions. You can find a full selection of A/V cable and
connectors at your local RadioShack store
.
0
+)*6
"8
+5+10
The camera has eight high-intensity LEDs (Light Emitting
Diodes) for picking up clear images in dark locations.
To turn on the night vision function, slide the
ON/OFF/NIGHT to NIGHT .
±
&KR"5YKVEJ 1P 1HH
1 Channel 1 enabled Channel 1 disabled
2 Channel 2 enabled Channel 2 disabled
3 Channel 3 enabled Channel 3 disabled
4 Channel 4 enabled Channel 4 disabled
5
Eight second
interval in display
rotation
Four second interval
in display rotation
±
"016'"
±
"
The video image displayed on the
monitor may appear “snowy” when
the camera is operating in
darkness or very low levels of light.