Radio Shack 64 - Manual (Page 36)

36
Setting a Timer
Note: If you use a TV/monitor that is connected
to the VCR’s
R-AUDIO-L/VIDEO OUT jacks, set
the TV/monitor to its video mode and skip
Steps 2 and 3.
1. Turn on the VCR and the TV.
2. Set the TV to the same channel as 3-CH-4
on the back of the VCR.
3. Repeatedly press TV/VCR until VCR
appears.
4. Set the audio recording mode to the
desired setting. See “Receiving/Recording
Stereo/SAP Broadcasts” on Page 34.
5. Load a blank cassette, or one that you
want to record over, into the VCR.
6. Press PROG . You see :
Or, if you have already entered timer set-
tings, the current settings for up to the first
four broadcasts appear.
Note: If the clock is not set, PLEASE SET
CLOCK BEFORE PROGRAMMING ap-
pears, then the clock setting screen ap-
pears. Set the clock as described in “Manu-
ally Setting the Clock” on Page 15, then
continue with Step 7.
7. Repeatedly press or to select an
empty timer number, then press . You
see:
8. Repeatedly press or to select the
date when you want to record.
To record a broadcast at the same time on
the same day every week, press either but-
ton until
WEEKLY flashes and the desired
day of the week appears.
To record a broadcast at the same time
Monday through Friday, press either button
until
DAILY flashes and MON-FRI
appears.
To record a broadcast at a set time today,
press either button until today’s date
flashes and
TODAY appears.
ART ART DATE
-- -- --:-- --
N / A
ART STOP CH
SLP
KEY
KEY
ROG KEY
- - - - - - - -- - - - - - -
ART ART DATE
-- -- --:-- --
N / A
ART STOP CH
SLP
KEY
KEY
ROG KEY
- - - - - - - -- - - - - - -
ART ART DATE
:-- :-- --:-- --
N / A
ART STOP CH
SLP
KEY
KEY
ROG KEY
- - - - - - - -- - - - - - -
ART ART DATE
-- -- --:-- --
N / A
ART STOP CH
SLP
KEY
KEY
ROG KEY
- - - - - - - -- - - - - - -
ART ART DATE
-- -- --:-- --
N / A
ART STOP CH
SLP
KEY
KEY
ROG KEY
- - - - - - - -- - - - - - -
16-634.fm Page 36 Tuesday, July 20, 1999 5:37 PM