Features – RIDGID R7000 User Manual
Page 8
8
PRODUCT SPECIFICATIONS
n
Chuck Capacity .....1/16 in. (1.6 mm) to 3/8 in. (10 mm)
n
Input....................... 120 V, 60 Hz, AC only, 6.5 Amperes
n
No Load Speed........................................... 0-2500/min.
n
Net Weight ............................................. 3.6 lbs. (1.6 kg)
Before using this product, familiarize yourself with all oper-
ating features and safety requirements. However, do not let
familiarity with the tool make you careless.
FEATURES
Your new tool
is equipped with the following features.
See Figure 1.
LEVEL AND BELT CLIP
Two convenient features provided on your drill are a level
and a belt clip. The level is recessed in the motor housing
on your drill. It can be used to keep drill bits level during
both horizontal and vertical drilling operations. The belt clip
is molded into the top of the motor housing on your drill.
®
SWITCH
TRIGGER
FORWARD-REVERSE
LEVER
TOP VIEW OF LEVEL FOR
HORIZONTAL DRILLING
END VIEW OF LEVEL FOR
VERTICAL DRILLING
LOCK-ON
BUTTON
MOLDED BELT CLIP
KEYLESS CHUCK
LEVEL
Fig. 1
LIGHTED PLUG
The lighted plug helps to easily identify live tools.
LIGHTED
PLUG