Renesas Emulation Pod M3062PT3-RPD-E - Manual (Page 58)

M3062PT3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugger)
REJ10J0040-0600 Rev.6.00 July 01, 2006 Page 58 of 104
3.3.2 Checking Connections of the Emulator System
Check to see that the emulator debugger has been connected correctly to the emulator.
Checking connections of the emulator system
When the emulator debugger is connected correctly to the emulator after
you have finished setting up the Init dialog box and the MCU Setting dialog
box, you will see a message “Connected” displayed on the “Debug” tab of
the Output window.