Rdv-985 dvd player, Preference 2 screen options – ROTEL RDV-985 User Manual

Page 24

Advertising
background image

24

RDV-985 DVD Player

On Screen Guide

The RDV-985 can display “on-screen guide”
icons or characters on the picture. These in-
clude the Multi-Angle icon

, the Subtitle

icon

.

Use the Cursor Buttons /

7

to turn the

guide display on or off.

Monitor Type

You can select the monitor type to match your
TV when you playback DVD discs recorded
for wide screen televisions.

4:3 LB

(Letter Box Conversion)

When you connect a normal TV to the unit
and play a wide picture recorded on a DVD
disc, the picture is
displayed with
bands across the
upper and lower
portions of the
screen.

4:3 PS

(Pan scan Conversion)

When you connect a normal TV to the unit
and play a wide picture recorded on a DVD
disc, a portion of the picture is automatically
cut off from the left and right sides of the image.
Depending on the disc, it may not be possible
to playback in this
mode. In this
case, the picture is
played back as in
4:3 LB

mode.

16:9 WIDE (Wide Television screen)
When you connect a wide-screen TV to the
unit.

PREFERENCE2

PREFERENCE1

MENU LANGUAGE

ENGLISH

AUDIO LANGUAGE

ENGLISH

SUBTITLE

ENGLISH

ON SCREEN LANGUAGE

ENGLISH

ON SCREEN GUIDE

ON

MONITOR TYPE

PRESS

KEY

4:3 LB

Preference 2 Screen Options

Digital Audio Output

To connect the unit‘s digital output to an ex-
ternal device equipped with a digital input,
this item must be set correctly.

PCM ONLY

When you connect the DIGITAL OUT jack
of the unit with the linear PCM digital input
of other audio equipment.

STREAM/PCM
When you connect to the digital input of an
amplifier with built-in DTS, Dolby Digital, and
MPEG audio decoder.

DOLBY DIGITAL/PCM
When you connect to the digital input of a
Dolby Digital decoder, or an amplifier with
built-in Dolby Digital decoder

The table below shows the relationship be-
tween types of playback discs and output sig-
nals.

NOTE: The RDV-985 does not provide the
DTS decoding function. When playing a
DVD or Audio CD disc with DTS, use a DTS
decoder to get correct signals from your
speakers. Never use the unit's analog out-
put jacks, which output incorrect signals
that may damage your speakers.

PREFERENCE2

PREFERENCE1

DIGITAL AUDIO OUTPUT

PCM ONLY

DOWN MIX

L

0

/ R

0

COMPRESSION

ON

PRESS

KEY

SCREEN SAVER

MODE1

AV COMPULINK MODE

DVD1

AUTO STANDBY

OFF

Playback discs

DVD with 48-kHz,
16-bit linear PCM

DVD with 48-kHz,
20/24-bit linear
PCM

DVD with 96-kHz,
linear PCM

DVD with DTS

DVD with Dolby
Digital

DVD with MPEG
audio

Video CD
SVCD

Audio CD

Audio CD with
DTS

STREAM/PCM

48-kHz,
16-bit linear
PCM

48-kHz,
20-bit linear
PCM

No output

DTS
bitstream

Dolby Digital
bitstream

MPEG
bitstream

44.1-kHz,
16-bit linear
PCM

44.1-kHz,
16-bit linear
PCM

DTS
bitstream

PCM ONLY

48-kHz, 16-bit
linear PCM

Output

DOLBY DIGITAL/PCM

No output

48-kHz, 16-bit
linear PCM

If you connect the analog outputs and digital
outputs simultaneously, be sure to select the
source of the amplifier correctly, or set the level
control of the amplifier connected to the analog
outputs to minimum.

Down Mix

By setting DOWN MIX correctly, you can get
the optimum stereo mix for your audio sys-
tem from DVD discs recorded with Dolby
Digital surround multichannel audio.

Use the Cursor Buttons /

7

to change

the DOWN MIX setting.

Lt/Rt (Dolby Digital disc only)
For monitoring the unit's 2-channel audio
output signals via a Dolby Pro Logic decoder.

L

0

/R

0

For monitoring the unit's 2-channel audio output
signals via a TV or an amplifier with no built-
in Dolby Pro Logic decoder. Also for record-
ing DVD audio to a cassette tape, MD, etc.

The DOWN MIX function does not work when
the 3D PHONIC (VSS) function is activated.

Compression

You can compress the dynamic range of the
sound if needed. Using this function, you can
listen to sound at low volumes easily.

Use the Cursor Buttons /

7

to turn com-

pression on or off. When set to ON the au-
dio dynamic range compressed. When set to
OFF audio is played back as it was recorded.

The Compression function works only when
playing back a disc recorded with DOLBY
DIGITAL 1CH or 2CH. The setting is not ef-
fective for other discs. The Compression func-
tion does not work when the 3D PHONIC (VSS)
function is activated.

PREFERENCE2

PREFERENCE1

DIGITAL AUDIO OUTPUT

PCM ONLY

DOWN MIX

L

0

/ R

0

COMPRESSION

ON

PRESS

KEY

SCREEN SAVER

MODE1

AV COMPULINK MODE

DVD1

AUTO STANDBY

OFF

SCREEN SAVER

MODE1

AV COMPULINK MODE

DVD1

AUTO STANDBY

OFF

PREFERENCE2

PREFERENCE1

DIGITAL AUDIO OUTPUT

PCM ONLY

DOWN MIX

L

0

/ R

0

COMPRESSION

ON

PRESS

KEY

Advertising