RocketFish BLUETOOTH WIRELESS SPEAKER RF-SPX15 - Manual (Page 9)

9 Bluetooth Wireless Speaker | RF-SPX15
Connecting your speaker using Bluetooth
Before you can use your speaker with a Bluetooth device, you need to
pair your speaker and the device.
To connect your speaker using Bluetooth:
1 Make sure that a compatible Bluetooth device (like a music player
or phone) is turned on and within 33 feet (10 meters) of your
speaker.
2 Make sure that your speaker’s battery is fully charged, and your
speaker is turned off.
3 Press and hold the / / button for five seconds until the
LED indicator flashes red and blue. Your speaker is in pairing
mode.
4 Activate pairing mode on your Bluetooth device, then set the
device to start searching. If you are unsure about how to activate
pairing mode on your device, see the documentation that came
with the device.
5 On the Bluetooth device, select RF-SPX15 in the list of found
devices.
6 On the Bluetooth device, enter 0000 as the PIN, if prompted. Your
speaker beeps twice and the LED indicator lights blue.
7 If you are pairing with a computer, make sure that your speaker is
selected as the computer’s default playback device. See the
computer’s documentation for instructions.
Connecting your speaker using the LINE IN jack
To connect your speaker using the LINE IN jack:
• Connect a 3.5mm audio cable (not provided) to the LINE IN jack
on the back of your speaker and to the audio out jack on an audio
device, such as an MP3 player.
When your speaker is connected to a device using the LINE IN jack:
• If you connect a paired Bluetooth device, such as a phone, to the
LINE IN jack, you can answer or make phone calls while listening
to music. When a phone call is in progress, the device connected
the LINE IN jack stops playing music.
• You must use the connected device to control music playback.
RF-SPX15_11-0753_MAN_V1_English.fm Page 9 Thursday, December 29, 2011 4:53 PM