Roadmaster Sterling All Terrain - Manual (Page 11)

Figure 5
hitch pin stinger
©
Rotate both arms up,
until they are vertical. release
latch clip
9
release latch and
locking mechanisms point up
Figure 6
Connecting the tow bar
continued from preceding page
Attach the tow bar so that the locking mechanisms
tow bar in
folded position
CAUTION
and the release latch are pointing up, as shown in
Figure 6. Components of the tow bar may be damaged
if the tow bar is attached with the release latch and/
or the locking mechanisms pointing down.
4. Hold both tow bar arms firmly, and rotate them up,
so that they are vertical, as shown in Figure 5.
Never release the tow bar arms when they are in the
vertical position. The arms can fall and cause severe
personal injury.
5. Push the release latch
(Figure 5, Figure 7) forward,
to bring both arms down to a
horizontal position.
Standing to one side,
swing both arms away from
you. Then, align the holes in
the outermost arm with the
holes in one of the tabs on
the quick-disconnect base (Figure 8).
Attach the tow bar arm to the quick-disconnect base
with one of the included base pins (Figure 8). Lock the base
continued on next page
WARNING
Figure 7