Roberts Radio ecologic 7 - Manual (Page 26)

25
17. Press and release the Tuning/Select control to enter the setting. The
alarm source option will fl ash on the display.
18. The alarm can be set to DAB, FM or buzzer. For whichever radio mode
is selected, the radio alarm may be set to any of the stations which
have been stored as presets or to the last station listened to.
Rotate the Tuning/Select control to highlight either 'Buzzer' or the
required radio mode. Press the control to confi rm the selection.
19. If setting the alarm to a radio option, rotate the Tuning/Select control
to highlight the desired "preset 1 -10" or rotate until "Last played" is
selected. Press and release the Tuning/Select control.
Note that you can only set the alarm to use a preset which has already
been stored.
20. In order to store the alarm settings you will need to save the settings.
Rotate the Tuning/Select control until "Yes" is highlighted on the
display. Press the Tuning/Select control to confi rm alarm settings
and return to normal radio mode.
If you decide not to save the settings, highlight "No" and then press
the control your radio will return to normal radio mode without saving
the setting.
Note: If you make a mistake at any point while setting the alarm, press
the Menu button to go back to the previous screen.
The radio alarm is indicated in the display by the symbol and the buzzer
alarm is indicated by the symbol when in stand-by. When your radio is
set to wake by the radio alarm, your radio will switch to either the selected
preset station or last listened. Be sure to set the volume to a suitable level
if using DAB or FM options.
17-20