Runco CL-810 - Manual (Page 30)

30 Runco CL-810 Owner’s Operating Manual
Turning off the Power
LIGHT
OFF ON
VID S-VID COMP1
RGBHD HDMI
COMP2
Basic Operation
• Press the OFF button to turn off the
projector.
• The POWER LED will blink green and the
fans will speed up for a quick cool-down.
The projector will not respond to any
command for 90 seconds.
• The POWER LED will light solid orange
once the cooling down cycle has
completed.
• The fans will run for three minutes to
cool.
• You can turn the projector back on after
approximately two minutes.