Russound CAM6.6T-S1 - Manual (Page 104)

104
CAM6.6
CAM6.6 Back Panel (Controller ID 2)
CAM6.6 Back Panel (Controller ID 1)
CAM6.6
102.5 102.5 102.5
92.5 92.5 92.5
UNO-S1
UNO-S1
SAMPLE CONFIGURATIONS
MULTIPLE CONTROLLERS WITH TWO TUNERS
System with two CAM6.6T (internal tuner) controllers
The configuration below is suitable for 7 to 12 zones
that will have access to the tuner in the controller to
which its keypad is connected only. Built-in tuners are
always Source 1 and cannot be changed. If you have
more than one internal tuner, you must set each tuner
to its specific Controller ID number. If you want each
controller to have access to dual tuners, a suggested
solution is to use an ST2 Dual Tuner with two CAM6.6s
(see next page).
CAM6.6T (1) -
Controller Setup Menu: Controller ID = 1
Peripheral Setup Menu: Controller ID = 1
CAM6.6T (2) -
Controller Setup Menu: Controller ID = 2
Peripheral Setup Menu: Controller ID = 2
A CAT-5 patch cable is use to connect the RNET Link
Out of Controller 1 to the RNET Link In of Controller 2.