Roper PXD1000 - Manual (Page 5)

5
Signal: Rising edge sensitive
WEN(-) - pin 56 & WEN(+) - pin 6
Name: Write Enable
Signal provided by: Camera
Purpose: Defined by camera
FIELD(-) - pin 55 & FIELD(+) - pin 5
Name: Field
Signal provided by: Camera
Purpose: signal for even or odd field for interlaced output
CTRL#0(-) - pin 54 & CTRL#0(+) - pin 4
Name: Control 0
Signal provided by: Frame Grabber
Purpose: Provides TTL output for use by application
CTRL#1(-) - pin 53 & CTRL#1(+) - pin 3
Name: Control 1
Signal provided by: Frame Grabber
Purpose: Provides TTL output for use by application
CTRL#2(-) - pin 52 & CTRL#2(+) - pin 2
Name: Control 2
Signal provided by: Frame Grabber
Purpose: Provides TTL output for use by application