ROWENTA 2-Slice Toaster - Manual (Page 5)

5
“HIGH-LIFT” FUNCTION
Use the “HIGH-LIFT” bread function by lifting the control lever
when toasting has finished. This will raise the bread and make it
easier to remove.
Do not use “HIGH-LIFT” during toasting.
STOP/EJECT FUNCTION
You can cancel the toasting or warming at any time by pressing
the STOP/EJECT button (H).
Do not use the control lever to stop the toasting cycle.
DEFROST FUNCTION*
If toasting frozen bread, place in the toasting slots and adjust the
browning control to the desired position.
Press the lever down and press the “DEFROST” button (J)*.
The bread will take longer to toast as the toaster will
automatically defrost the bread first.
BAGEL FUNCTION *
This function uses only the external heating elements. Place cut
side of bagel towards the outside of toaster.
• Select the browning level desired on the dial from 1 to 7.
• Press down the control lever then press the “BAGEL” button (I).
• Your bagel will be toasted on the cut side of the bagel
according to the browning selection.
• At the end of the cycle, the bagel will pop up automatically and
the toaster will switch off.
• If your bagel is too heavy, pull up the control lever to bring it out.
WARMING PLATE
Use the integrated warming plate feature (C) to reheat croissants,
rolls and other bakery products.
NEVER LEAVE TOASTER UNATTENDED DURING USE.
Use caution when warming sugar coated or filled items (such
as toaster pastries). Always set control to lowest setting.
Place the bakery product(s) directly on the integrated warming
plate ensuring that it does not hang over the edge of the plate.
Set the browning control dial to the #2 position.
Lower the control lever until it locks into position. The toaster is
now on and heat will rise to the warming plate.
The toaster stops automatically and the control lever springs up.
To heat the other side, turn the bakery product(s) over using oven
gloves or bread tongs.
CAUTION : THE WARMING PLATE WILL BE HOT.
10
9
8
7
6
5
4
4
5
6
7
10
8
9