REL Acoustics Storm - Manual (Page 4)

4
R/H L/H
Amplifier Speaker
Outputs
Red Yellow Neutrik Speakon
Interconnect
(Supplied)
Black
To Subwoofer
High Level Input
Fig. 1
2. Connect the Mains lead to STORM and to the mains and switch ON.
To Connect to a Dedicated Sub-woofer Output:
See Fig. 2
1. For this connection it will be necessary to use whatever type of
connector is needed by this output. Normally it would be a phono type
connector. For this method of connection a phono to phono type
interconnect is required, available from your dealer.
Note:- If only a single phono subwoofer output is available, either use a ”y”
splitter to connect the two phono plugs from the REL or use a single
phono to phono interconnect. This will reduce the volume by 6db.
Amplifier Dedicated
Subwoofer Outputs
Phono to Phono Interconnect
(Optional Extra)
To Subwoofer
Low Level Input
Fig. 2
2. Plug one end of the phono to phono interconnect into the dedicated
sub-woofer outputs on your power amplifier or surround processor
and the other end into the line level input on STORM.
R B R B
R/H L/H