Roberts Radio RD-25 - Manual (Page 15)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
14
Operating your radio - Search tuning FM and MW
1. Fully extend the telescopic aerial for FM reception. For MW there is
a built in ferrite aerial. Rotate your radio for best reception.
2. Press the On/Off button to switch on your radio. The display will
show "Welcome to Digital Radio" for a few seconds.
3. Press the Band button to select the FM or MW band.
4. Press and immediately release the Auto tune button, your radio will
scan in an upwards direction (low frequency to high frequency) and
stop automatically when it fi nds a station of suffi cient strength.
5. After a few seconds the display will update. If the FM band is selected
the display will show the station name.
6. To fi nd other stations, press and release the Auto tune button as
before.
7. To scan the FM or MW band in a downwards direction (high frequency
to low frequency) press and hold down the Auto tune button for 0.5
seconds and then release.
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust the Volume control to the required setting.
10. To switch off your radio press the On/Off button.
2
4
6
10 9
3