Royal Sovereign RDS-901X - Manual (Page 3)

Important Safety Instructions
1. Read all instructions before use and save these instructions for later use.
2. Follow all warnings and instructions market on the product.
3. Unplug this product from the wall outlet before cleaning. The housing can be cleaned
with cloth, dampened with a mild soap and water solution.
4. Unplug this product from the wall outlet, when you move this product, or don’t use for a
long time.
5. Avoid spilling liquids on the product.
6. This product should never be placed near or over a radiator or heat source.
7. Do not alter or extend electric plug. Plug is configured for appropriate electrical supply.
8. Unplug this product from the wall outlet and refer servicing to qualified personnel under
the following conditions :
A. When the power code or plug is damaged or frayed.
B. If liquid has been spilled on the product.
C. If the product does not operate normally when the operating instructions are followed.
9. Keep out of reach of children and pets.
Cautions
1. Keep personal and loose objects(Jewelry, Ties, Long Hair, Etc.) away from paper entry.
Serious injury may result..
2. Do not attempt to shred paper clip, staples, laminated items, photo, plastic bag or
cloth material, they may damage the cutting system.
3. Do not insert wet paper since it may twine around the cutter and damage the machine.
4. It is advised not to shred more than 5 sheets per pass; exceeding the designed shred
capacity should be avoided since the gear and motor can be damaged.
5. Continuous operation should not exceed 100sheets. When shedding for a long period of
time,or leaving the shredder “ON” when paper is jammed, the motor may stop as the
result of overheating. If this occurs, please switch off the main power and allow the
motor to cool for 30 minute before resuming operation.
6. Use “Reverse” only when necessary, frequent reverse operation may cause paper particle
to accumulate around the entrance and affect proper shredding.