Remington S-1004 - Manual (Page 4)

7
How to Use Usage Tips
Setting Hair Type
A. 1-5 Very fine, fragile,
damaged hair
B. 6-10 Normal, easy to
straighten hair
C. 11-15 Thick hair
D. 16-20 Very coarse, difficult to
straighten hair
Closing Lock
This professional flat iron has a closing lock
to make the unit easier to store. To lock the
iron, simply squeeze the plates together
and flip the switch down to the locked
position. To unlock, flip the switch up in to
the unlocked position. NOTE: Do not heat
the unit in the locked position.
6
Heat Settings
Take extra care when using a professional
styler. To prevent hair damage, make sure
to use the correct temperature setting for
your hair type.
Straightening Your Hair
1. Hair should be dry and free of tangles
before using the straightening iron.
2. Plug the straightener into an electrical
outlet. Slide the ON/OFF switch to the
ON position.
3. Adjust the temperature using the
variable temperature control dial. The
ready light will flash while the unit
heats up, then glow steadily when it
has reached the selected temperature.
4. Divide hair into manageable sections
and clip the upper layers on top of your
head and out of the way. Work with
underneath layers first.
5. Test the styler on a small section of hair,
then adjust the temperature up or down
before styling the rest of your hair.
NOTE:
■ If you find that you need a higher
setting while straightening your hair,
simply adjust the temperature by
turning the variable temperature
control dial forward.
■ While straightening your hair, if you
find that you need a lower setting,
adjust the temperature by turning
the variable temperature control dial
back. Because the unit is already
hot, it may take a minute to cool.
6. Take a small section of hair and pull
hair down and away from your scalp,
and hold it taut.
7. Starting at the roots, clamp hair firmly
between the plates and run the styler
down the entire hair strand, from root to
tip, in one smooth stroke. Do not hold it
in one area for a long period of time or
damage to hair may occur.
8. Repeat with all sections of your hair,
working with the underneath layers
first, then the top and sides.
9. When you are finished styling, press and
hold the ON/OFF button to turn the unit
off, unplug it, and allow it to cool before
storing.