Roland Super CUBE-60 User Manual

Owner’s manual, Main features

Advertising
background image

Owner’s Manual

Thank you, and congratulations on your choice of the Roland CUBE-60 Guitar Amplifier.

These sections provide important information concerning the proper operation of the unit.
Additionally, in order to feel assured that you have gained a good grasp of every feature
provided by your new unit, Owner’s manual should be read in its entirety. The manual
should be saved and kept on hand as a convenient reference.

This unit is equipped with a protection circuit.
The protection circuit helps ensure safety by operating when excessive input continues for
a long time while the device is at a location with a high ambient temperature. Sound drop-
out may occur when the protection circuit is actuated during use.
Please read through the documentation carefully to ensure correct use.

Main Features

• 60-watt output, high-performance, DSP guitar amp with built-in 30 cm (12-inch) speaker.

• Offers nine types of COSM amps, including realistic modeling of seven of the most

popular guitar amps and two original amp types, “ACOUSTIC” and “DYNA AMP.”
The newly developed “DYNA AMP” lets you achieve previously unexperienced levels
of tonal variation based on your picking dynamics, for whole new levels of expression.

Composite Object Sound Modeling (

COSM

) is Roland’s innovative and powerful

sound modeling technology. COSM analyzes the many factors that make up the
original sound, such as the electrical and physical characteristics of the original, and
then produces a digital model that can reproduce the same sound.

• Channel can be switched between “JC CLEAN” and “LEAD.” Channel switching can

be done via foot switch (optional).

• In addition to an easy-to-use, 3-band equalizer, the CUBE-60 also features a PRESENCE

knob, which you can use to create a wide variety of precisely defined sounds.

• Comes equipped with four effects types, chorus, flanger, phaser, and tremolo, along

with an independent system with the basic delay and reverb effects. You can also use
foot switches (optional) to switch these effects on and off.

• Equipped with a convenient “RECORDING OUT jack” handy for use in recording.

This output also functions as a headphone jack.
Also features LINE OUT, TUNER OUT, and EXT SPEAKER outs. These outputs can be
used for all kinds of performances, from recording to live gigs.

Copyright © 2004 ROLAND CORPORATION

All rights reserved. No part of this publication may be reproduced in any form

without the written permission of ROLAND CORPORATION.

Before using this unit, carefully read the sections entitled

• IMPORTANT SAFETY INSTRUCTIONS (p. 2)
• USING THE UNIT SAFELY (p. 3–p. 4)
• IMPORTANT NOTES (p. 5).

CUBE-60_e.book 1 ページ 2004年3月5日 金曜日 午後4時41分

Advertising