Radio Shack 273-1687 User Manual

Page 6

Advertising
background image

6

Selecting th

e Adaptaplug

• Yellow (D) — 5.5

×

3.3 mm with 1.4

mm pin

• Green (Q) — 6.3

×

3 mm

• Yellow (T) — 6.5

×

4.3 mm with 1.9

mm pin

• Orange (H) — 3.4

×

1.3 mm

1. Refer to “Compatible Computers”

on Page 11 or examine the output
connector of your computer’s AC
adapter and compare it to the
Adaptaplugs supplied with your
power adapter.

2. Select the Adaptaplug that

resembles the original plug and
test it by temporarily inserting it
into the device to be powered. The
center contact or pin must be the
correct size to ensure proper
electrical contact. If it is too small
or large, additional Adaptaplugs
are available from your local
RadioShack store.

3. Connect the Adaptaplug to the

output socket at the end of the
power adapter’s cord.

If the tip on the device’s power jack
is positive, align

+

(positive)

marked on the Adaptaplug to

TIP

marked on the output socket. If the

Advertising