RCA RS2058 - Manual (Page 21)

16
EN Operation in the Three Operation
Modes
All mode
You can select from all available channels under
this mode. Press
or to select the
previous or next channels.
Category mode
• To change category, press SELECT/BACK
(CAT +/CAT-) on the main unit or or
on the remote.
• To select stations under the current selected
category, press or .
Preset mode (Using Presets)
You can use presets under this mode. Before
using presets, you should set presets manually.
Setting Presets Manually
1.Press or to access the desired
channel.
2. Press PROG and the most recently accessed
program location flashes on the display.
3. If a different program location is preferred,
press or to move to the desired
preset number (1-32).
4. Press PROG to store the selected frequency at
that preset.
Using Presets
Press or access the previous or next
preset station.
Signal Strength
You can view the signal strength from the
display:
Sirius Satellite Radio
Excellent
Good
Weak
No Signal
Signal Strength
Tips:
Adjust the position of the antenna for
better reception. Follows the instruction on
the User’s Manual of the Tuner.
RS2058 EN_Sirius 8/5/06 10:55 AM Page 23