Remington BV12199A - Manual (Page 14)

10 | Chapter 4: Blower/Vac Operation
118034
Figure 4-12: Removing vacuum tube adapter
Figure 4-13: Removing debris from impellers
Figure 4-9: Removing bag/adapter assembly
Emptying the Vacuum Bag
1. Turn vacuum off and unplug power
cord.
2. Undo the hook and loop strap and
remove vacuum bag from adapter (see
Figure 4-9).
3. Unzip vacuum bag and shake out
contents (see Figure 4-10).
4. Zip the vacuum bag closed and
securely attach to adapter using the
hook and loop strap.
Figure 4-10: Unzipping and emptying bag
Removing Clogged Debris
from the Impeller
1. Turn vacuum off and unplug power
cord.
2. Press locking lever on vacuum tube
adapter and remove tube adapter as-
sembly from blower/vac (see Figures
4-11 and 4-12).
3. Check the impeller for clogged debris
and any signs of damage. Carefully
remove debris from impellers (see
Figure 4-13).
4. Replace vacuum tube adaptor assem-
bly.
Figure 4-11: Pressing locking lever