RCA VR602HF - Manual (Page 12)

10
Setting Up the VCR
Startup
7. Use TV•VCR button.
Skip this step if you used one of the advanced hookups.
When using one of the basic hookups, the TV•VCR button lets
you switch between the picture coming from the VCR or
television channels. This button lets you record a program on
the VCR while watching another channel on the TV. Details
are on page 20.
A . Press TV•VCR to see the picture from the VCR.
The VCR indicator lights in the display panel.
B . Press CHAN up or down to change channels on
the VCR. The channel number changes on the TV screen.
C . Press TV•VCR to see the TV channels.
The VCR indicator does not light in the display panel.
Change channels using the TV’s remote.
D . Return the TV to the VCR viewing channel —
CH3 or CH4 .
E . Press TV•VCR to switch back to the picture from
the VCR .
8. Set AUTO TV/VCR feature.
If you used one of the basic hookups, leave the Auto TV/VCR
feature set to ON.
If you used the video input of your TV to connect the VCR,
you can prevent the VCR indicator from turning on
automatically.
A . Press MENU on remote to display VCR MAIN MENU .
B . Press 4 to display VCR SETUP OPTIONS .
C . Press 3 to select AUTO TV/VCR: ON or OFF .
• Select ON if you used one of the basic hookups and
watch your VCR on channel 3 or 4 of your TV. The
VCR will automatically switch the TV•VCR setting to
VCR every time you turn on the VCR, insert a tape with
its safety tab removed, or press PLAY.
• Select OFF if you used one of the advance hookups and
watch your VCR on the video input channel of your
TV. The
VCR indicator will not turn on automatically
and the signal from your antenna or cable to your TV
will not be interrupted.
Pressing TV•VCR on the remote will turn the VCR
indicator on or off and switch the antenna signal.
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
4 VCR SETUP OPTIONS
SETUP OPTIONS
1 REMOTE CONTROL: VCR1
2 AUTO PLAY: ON
3 AUTO TV/VCR: ON
4 AUDIO SETUP
0 EXIT TO MAIN MENU