Rose electronic 2 - Manual (Page 2)

ƒ Phone: 281-933-7673 ƒ E-mail: [email protected] ƒ
10707 Stancliff Rd. Houston, TX 77099
Rose Electronics – Europe: +49 (0 ) 2454 969442 Rose Electronics – Asia: +65 6324 2322
DS-UMR2  Copyright 2008 Rose Electronics. All rights reserved W W W . R O S E . C O M
Typical Application
Access computers or servers locally, over your network, or
over IP from any location worldwide
Introduction The UltraMatrix Remote 2 is a versatile and powerful
product that extends the range of access to your computers from
anywhere in the world. Its user friendly interface and powerful on-
screen display makes managing your computers, even at the BIOS
level, easier and more efficient. With the UltraMatrix Remote 2’s
expansion capability, the number of computers that can be remotely
accessed is up to 1,000.
Models The UltraMatrix Remote 2 is available in several different
models. All models are fully expandable in multiple configurations
giving users access to as many as 1,000 computers.
Security
System security can be configured to give access to
multiple users, each with a unique user ID and password. Each user
can be granted access to certain computers and restricted from
others. There are four view modes that can be assigned to each
user; view, share, control, and private. This gives the flexibility of
allowing certain users full access or just view capabilities. All
transmissions to and from the remote computer are128 bit encrypted
for added security.
On-screen display The UltraMatrix Remote 2 excels with its on-
screen display (OSD) technology. The intuitive interface uses drop-
down lists of computers to connect to and pop-up menus to
configure the unit. User-friendly help lines explain each selected item.
CPU names, security, appearance, screen saver and many other
features are easily configured. You can use the OSD to connect to
computers by name, view the system connections, and observe
system status in real time. The interface can be programmed for
English, French, German, Spanish, Italian, or Portuguese.
Installation The UltraMatrix Remote 2 is easy to install and
configure. Just connect the unit to the computers to access, connect
the local access KVM stations and connect the unit to your network.
Next configure the IP addresses for unit access over IP and its ready
to use locally or from around the world.
Operation The RealVNC viewer program is used to remotely
access the computers or servers connected to the UltraMatrix
Remote 2. You can connect to a computer using simple keyboard
commands or an on-screen list of computers. Once a computer is
selected and connected, the remote workstation can fully control,
update, maintain and configure the computer or server.
Flash memory To support the latest devices and provide product
enhancements and features, the UltraMatrix Remote 2 contains flash
memory. Free, lifetime firmware updates are available from our web
site at www.rose.com.
Serial devices Any CPU port on the Multiplatform model can be
configured to be serial. Once configured, the OSD is so powerful that
when you switch to that CPU port it converts to a color VT220 terminal
emulator for that port. When you connect to a serial device, you get a
24x80 screen with two status lines. You can access the serial device just
as if you were connected with a terminal.
Keyboard and mouse The UltraMatrix Remote 2 fully emulates the
keyboard and mouse. You can use any combination of PS/2, USB, Sun,
PS/2 wheel, and serial mice. USB (PC, Apple, and Sun) and serial mouse
are for the computer side only, not the KVM side. It is compatible with all
major operating systems such as Windows, Solaris, Linux, UNIX, SGI,
and OSX.
Part Numbers
PC models
Remote
Users* Local
Users # of
CPUs Multi-
Platform Remote
Users* Local
Users # of
CPUs
RP2-1R2X8U/2 1 2 8 RE2-1R2X8U/2 1 2 8
RP2-1R2X16U/2 1 2 16 RE2-1R2X16U/2 1 2 16
RP2-2R2X8U/2
2 2 8 RE2-2R2X8U/2 2 2 8
RP2-2R2X16U/2 2 2 16 RE2-2R2X16U/2 2 2 16
RP4-1R4X16U/2 1 4 16 RE4-1R4X16U/2 1 4 16
RP4-2R4X16U/2 2 4 16 RE4-2R4X16U/2 2 4 16
RP4-4R4X16U/2 4 4 16 RE4-4R4X16U/2 4 4 16
RM-UBnn
Rackmount kit (1U chassis) nn= 19”, 23”, or 24”
RM-UCnn Rackmount kit (2U chassis) nn= 19”, 23”, or 24”
* One user, local or remote, per slot (same KVM port.)
/E P/N suffix = expansion card option - /E2 = 2 expansion cards
/ERJ P/N suffix = RJ expansion card option
/E2RJ = 2 RJ expansion cards
Specifications
Dimensions / Weight
#CPU
ports
Width Depth Height Weight
8 16.7” / 42.4cm 15.2” / 38.6cm 1.75” / 4.5cm 9.3lbs / 4.2kg
16 16.7” / 42.4cm 15.2” / 38.6cm 3.50” / 9.0cm 14.0lbs / 6.4kg
Power 90-240VAC - Auto switching, 130 Watts
Connectors Power – IEC320 standard receptacle
CPU/KVM – DB25F
Expansion – DB15M/F
RS232 – RJ12 (6-pin)
Network – RJ45
Indicators Chassis Power, CPU select, CPU power
Link, Local access, remote access, VNC,
and speed (10 / 100)
Video bandwidth 150MHz
Resolution 1280 x 1024
Chassis Electro galvanized steel, black powder coated
Controls Power on/off switch
Indicators LEDS: Power, Select, CPU power
Environment 0 – 45 ºC, 5% - 80% non-condensing RH
Approvals FCC, VCCI, UL, cUL, TUV, CE