Maintenance, Optional accessories, Warning – Ryobi RS280 User Manual

Page 11

Advertising
background image

Page 11

WARNING:

When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product
damage.

GENERAL

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, carbon dust, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc. come in contact
with plastic parts. They contain chemicals that can
damage, weaken, or destroy plastic.

LUBRICATION

All of the bearings in this tool are lubricated with a sufficient
amount of high grade lubricant for the life of the unit under
normal operating conditions. Therefore, no further lubrication
is required.

MAINTENANCE

When electric tools are used on fiberglass boats, sports
cars, wallboard, spackling compounds, or plaster, it has
been found that they are subject to accelerated wear and
possible premature failure, as the fiberglass chips and
grindings are highly abrasive to bearings, brushes,
commutators, etc. Consequently, it is not recommended
that this tool be used for extended work on any fiberglass
material, wallboard, spackling compounds, or plaster. During
any use on these materials it is extremely important that
the tool is cleaned frequently by blowing with an air jet.

WARNING:

Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing dust.
If operation is dusty, also wear a dust mask.

OPTIONAL ACCESSORIES

4600150

150 Grit Sanding Disc

5 Per Pack

4600220

220 Grit Sanding Disc

5 Per Pack

4600320

320 Grit Sanding Disc

5 Per Pack

4600503

Conversion Pad

2 Per Pack

All individual sanding grits are available in handy five sheet packs.

The following recommended accessories are current and were available at the time this manual was printed:

4600040

40 Grit Sanding Disc

5 Per Pack

4600060

60 Grit Sanding Disc

5 Per Pack

4600080

80 Grit Sanding Disc

5 Per Pack

4600100

100 Grit Sanding Disc

5 Per Pack

Advertising