Rockford Fosgate RFT3061A - Manual (Page 4)

I
NSTALLATION
INSTALLATION CONSIDERATIONS
The following is a list of tools needed for installation:
Volt/Ohm Meter #2 Phillips screwdriver
Wire strippers Battery post wrench
Wire crimpers Hand held drill w/assorted bits
Wire cutters 1/8" diameter heatshrink tubing
This section focuses on some of the vehicle considerations for installing your new
Amplified Subwoofer. Pre-planning your system layout and best wiring routes will save
installation time. When deciding on the layout of your new system, be sure that each
component will be easily accessible for making adjustments.
S
AFETY
I
NSTRUCTIONS
4
This symbol with “WARNING” is intended to alert the user to
the presence of important instructions. Failure to heed the
instructions will result in severe injury or death.
This symbol with “CAUTION” is intended to alert the user to
the presence of important instructions. Failure to heed the
instructions can result in injury or unit damage.
CAUTION: To prevent injury and damage to the unit, please read and follow the
instructions in this manual. We want you to have enjoyment from this
system, not a headache.
CAUTION: If you feel unsure about installing this system yourself, have it installed
by a qualified Rockford Fosgate technician.
CAUTION: Before installation, disconnect the battery negative (-) terminal to
prevent damage to the unit, fire and/or possible injury.
!
!
!
C
ONTENTS OF
C
ARTON
Amplified Subwoofer, either Model
RFT3061A, RFT3081A or RFT3101A
Installation & Operation Manual
Mounting Strap Kit
Remote Punch Bass Kit with Cord
1 Fuse Connector