Blackberry 1802G - Manual (Page 11)

Inserting the SIM card into the SIM card holder
Getting Started Guide 11
Inserting the SIM card into the SIM card holder
1. If you are using the on-board SIM configuration, turn the test board over to reveal the cut-out
that provides access to the SIM card holder on the underside of the radio modem.
Interface and Test Board (on-board SIM configuration) – bottom view
Note: You must have a SIM card that is authorized for use by the appropriate GPRS network provider. The
authorization must also allow access to the Access Point Name (APN) that will be targeted.
Warning: To prevent damage to your SIM card, do not scratch or bend the card or expose it to static electricity
or wet conditions.