Royal Sovereign RSL 2701S - Manual (Page 10)

10
3. Insert one of the core adapters into the right end of the film
core. For film with poly-in (adhesive side is inside the web), make
sure the adhesive side is facing upward. (Fig. 9)
Figure 9
4. Insert the film shaft into the roll of film from the right side with
the copper end last.
Align and insert the core adapter on the left end of the film
core. (Fig. 10)
Figure 10
5. Center the film on the shaft and lock it in place with the
locking core adapters. (Fig. 11)
6. Carefully return the film shaft back into place. (Fig. 12)
Figure 11
Figure 12