Installation – Raymarine E55061 User Manual
Page 8
5.
Peel the backing from the gasket and stick it
to the underside of the cradle.
7.
If mounting the keyboard in an area
unprotected from rain and/or sea spray, fit
the drain tube and ensure that it runs to a
suitable exit point below the level of the
keyboard and the studs.
8.
Fit the keyboard assembly into its housing.
With the dimples in the clamps fitting into
the nipples on the cradle, fit and secure the
clamps in place using the thumb nuts.
9.
Ensuring that the power is connected last,
connect all the cables, terminators etc
in the appropriate configuration (see
'Planning the Installation' on pages 4 to 6).
Wrap any excess cable and tuck away.
Do
not cut and resplice cables.
6.
Finger tighten the studs into position.
8
D7700-1
Installation
- continued