Model 3a, Line level preamplifier, Dimensions – Red Rose Music Model 3a User Manual

Page 2

Advertising
background image

Model 3a

Line Level Preamplifier

943 Madison Avenue

New York, New York 10021

212-628-5777

www.redrosemusic.com

Operational Characteristics:

Class A

Gain Architecture:

All vacuum tubes signal path

Power Supply Architecture:

Detachable RFI/EMI shielded external power
supply

11 discreet FET regulated-

All gain stages

individually regulated buffered

EMI/RFI power line filtration using AudioPrism’s pro-
prietary Quiet-line® technology

Input Connections:

Single-ended, gold plated, Teflon® in-

sulated, line-level inputs for Phono (line-level) CD, Tuner,
Video and Tape

Output Connections:

Two pairs of single ended, gold plated

Teflon® insulated, outputs for the connection of multiple
amplifiers

Control Section:

Five-position input selector, dual stepped

volume control using precision metal film resistors (only
two resistors in the signal path at any position) Operation
selector for on, mute and standby (designed to extend tube
life) All control switches are amperage, low-loss construc-
tion with silver-plated contacts. Source selector switches
both “hot” and ground simultaneously.

Internal Construction:

All circuit boards are vibration iso-

lated, glass-epoxy, copper-traced full ground plane design
active components are hand selected and matched-internal
wiring is OFC copper-each channel is separated from input
to output for shortest signal path and maximum isolation.

Tube complement:

(2) 6DJ8, (2) 12AU7 or 5814

Frequency Response

: 3.5 Hz –300 kHz

±

3 dB (0 dB

attenuation)

Gain:

20 dB @ 1 kHz

Total harmonic Distortion:

<.15% @ 1volt

Input impedance:

20 k

Output impedance:

220

Signal to noise:

>90 dB (1volt @ 100 k

, 95 dB typical)

Stereo separation:

> 90 dB from 10 Hz to 100 kHz

Channel Balance:

.2 dB maximum

Maximum Input Voltage:

7 volts RMS

Maximum output Voltage:

17 volts RMS

(0 dB attenuation, 1.3 volts RMS input, 1% THD)

AC power requirements:

120 VAC (100~240V available

upon request)

Dimensions:

Preamplifier:
Height: 3.92inches (9.96 cm)
Width: 17.00 inches (48.26 cm)
Depth: 12.50 inches (44.45 cm)
Weight: 14.0 lbs. net (5.45 kg)

Power Supply:
Height: 3.0 inches (7.62 cm)
Width: 5.0 inches (12.70 cm)
Depth: 10.50 inches (4.60 cm)
Weight: 10.0 lbs. net (4.60 kg)

Design Details and Features

Technical Specifications

Advertising