Roland cakewalk A-800PRO - Manual (Page 54)

54
Assigning MIDI Messages (EDIT Mode)
You can assign the MIDI CLOCK speed (20–250) to a controller.
In order to transmit MIDI CLOCK, the MIDI CLOCK setting must be “ON.”
➝ “MIDI CLOCK ON/OFF” (p. 64)
1 Press the [ACT] button and [ ] button simultaneously.
2 Slightly move the controller to which you want to assign tempo.
If the controller is a button, press it.
The number of the selected controller will blink in the display.
3 Verify that the display, and press the [ENTER] button.
fig.lcd-tempo.eps
4 Turn the [VALUE] knob until
“TEMPO” appears in the display.
5 Press the [ENTER] button.
* If the controller is a button, the tempo will be maximum (250) when on, and
minimum (20) when off.
Tempo Assignment
A-300_500_800C_e.book 54 ページ ２０１０年２月２２日 月曜日 午後９時１３分