Auto-squelch, Auto power save, Fcc information – Ricoh 21-1812 User Manual

Page 13

Advertising
background image

13

AUTO-SQUELCH

Your radio has auto-squelch, which means
you won’t hear anything on a channel un-
less someone is transmitting nearby on the
same channel. To turn off auto-squelch (so
you can hear weaker, distant transmis-
sions), hold down

MON

(monitor). Release

MON

to turn auto-squelch back on.

AUTO POWER SAVE

The automatic power save feature extends
battery life by reducing the power the radio
uses until it receives a signal or you press a
key. Because the receiving radio might be
in this mode, wait about 1 second after
pressing

PTT

to allow the receiving radio to

come to full power before speaking into the
microphone.

FCC INFORMATION

Important: Do not open your radio to
make any internal adjustments. Your radio
is set up to transmit a regulated signal on
an assigned frequency. It is illegal to alter
or adjust the settings inside the radio to
exceed those limitations. Any adjustments
made to your radio must be made by a
qualified technician using the proper test
equipment. To be safe and sure:

• Never open your radio’s case.

21-1812.fm Page 13 Thursday, August 5, 1999 3:06 PM

Advertising