Roberts Radio CD9913 - Manual (Page 13)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Programmed play
By programming the player you can play up to 21 tracks in any desired
order.
1. Whilst the CD is in STOP mode, press the Mode button. The
Programme indicator will start to flash and the display will show ‘01’.
2. Select the first track using the F.skip or B.skip buttons. The track
number flashes on the display and the Programme indicator lights
up. Store this track by pressing the Mode button.
3. The Programme indicator will flash and the display will show ‘02’.
4. Repeat the above steps until you have completed your program.
Press the Play/Pause button to commence play of the selected
tracks.
Checking a programme
1. Whilst the CD is in STOP mode, press the Mode button. The
Programme indicator will flash
2. Press the Play/Pause button to start playback of the programme.
3. Repeatedly press and release the F.skip button to step through the
programme. The display will show the programmed track numbers
and playback of the respective track will start.
Mode
1 On
Repeat Tra ck
Prog
B.Skip
2
F.Skip
2
On
Repeat Track
Prog
Mode
2
On Prog
Repeat Tra ck
Mode
1
On
Repeat Tra ck
Prog
F.Skip
3
Play/Pause
2
Mode
1
On
Repeat Tra ck
Prog
Stop
2
Play/Pause
4
Erasing a programme
1. Whilst the CD is in STOP mode, press the Mode button. The
Programme indicator will flash.
2. Press the Stop button to cancel the programme. Programmes are
also erased by:- Opening the CD door, moving the Function switch
to the 'Tape/Off' or 'Radio' positions and if the power supply is
interrupted in any way.
12