Riccar SUPRALITE RSL3 - Manual (Page 9)

6 7
How To Notes
Replacing the squeegee -
Model RSL4 Only
If your squeegee splits or begins to look
worn, simply remove the worn squeegee
from its track and slide a new one into
the track (figure 26).
Reset the circuit breaker
Your vacuum features a circuit breaker
to protect the machine against damage
due to a surge in the electrical current.
Electrical surging can be a result of, though
not limited to, a jammed brush roll (i.e.
vacuuming up a sock or throw rug) or a
jammed motor fan.
Should your SupraLite vacuum cleaner
experience a jammed brushroll with the
circuit breaker tripping, first press the on/off
button to the off position and unplug the
unit. Inspect the brushroll by removing the
bottom plate (see “How to Remove Bottom
Plate”) and remove any debris which may
be causing the jam. Reinstall the bottom
plate (see “How to Install Bottom Plate”),
reset the circuit breaker by pressing the
Circuit Breaker Reset Button (figure 2),
plug in power cord, and turn unit on. If
the unit fails to turn on, return it to an
Authorized Riccar Retailer for service.
Fig. 27
Circuit breaker
reset button
Fig. 26