Radio Shack OPTIMUS 16-3869 - Manual (Page 24)

22
Setting the Date and Time
The Date/Time screen will be presented if/when:
The camera is turned on for the first time.
The camera is turned on after removing the batteries for a long period of
time.
1. Select the item field by using the W / X button.
To increase the value, press the S button.
To decrease the value, press the T button.
2. Press the OK button after all fields are set.
Choosing the Language
Follow the steps below to set the OSD (On-Screen Display) language.
1. Press the MENU.
2. Press the
X button to select [Setup] menu.
3. Press the S/T button to select [Language], and press the OK button.
4. Select a language that you prefer by using the S/T button.
5. Press the OK button after all fields are set.
Note:
The language setting will be retained even if the camera is turned off.
mm/dd/yyyy 12 hr
Date/Time
Date: 01 01 2005
Time: 01 01 AM
OK:Enter W or X :Select Item
S or T :Change Value