Ryobi R10631 - Manual (Page 7)

Page 7
KNOW YOUR CORDLESS CIRCULAR SAW
See Figure 1.
Before attempting to use any tool, familiarize yourself with
all operating features and safety requirements.
Features include easily operated bevel cut and depth of cut
adjustment mechanisms; positive 0
°
bevel stop; spindle
lock; and blade wrench storage.
APPLICATIONS
(Use only for the purpose listed below)
■ Cutting all types of wood products (lumber,
plywood, paneling).
FEATURES
SWITCH
Your saw is equipped with a lock-off button which reduces
the possibility of accidental starting. The lock-off button is
located on the handle above the switch trigger. You must
depress the lock-off button in order to pull the switch trigger.
The lock resets each time the trigger is released.
NOTE: You can depress the lock-off button from either the
left or right side.
Fig. 1
SWITCH
TRIGGER
UPPER
BLADE GUARD
LOWER
BLADE GUARD
BLADE
BASE
ASSEMBLY
BEVEL CUT
ADJUSTMENT
(BEVEL ADJUSTMENT KNOB)
BLADE WRENCH
(5 mm HEX KEY)
DEPTH OF
CUT ADJUSTMENT
(DEPTH ADJUSTMENT KNOB)
BLADE WRENCH
STORAGE AREA
OPTIONAL RIP
GUIDE SCREW
(WING SCREW)
OPTIONAL RIP
GUIDE SCREW
(WING SCREW)
LOCK-OFF
BUTTON
45 45 50 50
30 30
22 22
SPINDLE
LOCK BUTTON
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating tools. Failure to do so could result
in objects being thrown into your eyes, resulting in
possible serious injury.
WARNING:
Do not allow familiarity with your circular saw to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict severe injury.