RCA L32WD23 - Manual (Page 16)

Connections and Setup
16 Chapter 1
Auto Channel Search Menu
Analog TV Channel 30: Found
Channels Found: 25
Progress: 30%
Complete the Initial Setup
Customizing items in the Setup menu allows your TV to perform correctly. Make sure you've
connected the TV to cable or an off-air signal before you continue.
Setup
u
u
u
u
u
u
u
To Move
u
Signal Source Cable TV
DTV Signal Strength
Auto Channel Search Start
Manual Channel Setup
Channel Labels
Menu Language English
Screen Format Stretch
Favorite Channel Off
OK To Select MENU To Exit
Setup
u
u
u
u
u
u
u
To Move
u
Signal Source Cable TV
DTV Signal Strength
Auto Channel Search Start
Manual Channel Setup
Channel Labels
Menu Language English
Screen Format Stretch
Favorite Channel Off
OK To Select MENU To Exit
Set the Menu Language
If English is your preferred language, skip this step and go to Set the
Signal Source.
To choose another language, press the MENU button then press the
right arrow button to enter the Setup menu. Press the down arrow
to highlight Menu Language, then press the right arrow to choose a
language. Continue to Set the Signal Source.
Set the Signal Source
From the Setup menu, press the up or down arrow button to highlight
Signal Source. If you connected Cable to your ANTENNA/CABLE
INPUT, the option is chosen for you and you can press the down
arrow button to highlight Auto Channel Search. To choose Air
(Antenna), press the right arrow button and then press the down
arrow button to highlight Auto Channel Search.
If you have ANALOG and DIGITAL channels,
the TV runs 2 separate channel searches.
Complete the Channel Search
Even though the initial channel search can take time, you must
complete it in order for your TV to display channels and programming.
With Auto Channel Search highlighted, press OK to begin the channel
search. The menu shows the TV is running a channel search. The TV
tunes to a program once the search is complete.
Some channels might have been found during the channel search that
are unavailable to view and you might want to get rid of these so they
don't appear as you change channels. To do this, highlight Manual
Channel Setup from the Setup menu. Note that removing channels
from your channel list may be time consuming, so you might want to
do it later. Go to page 34 for details on editing your channel list.