Radio Shack MICRO-36 - Manual (Page 6)

6 Preparation
rechargeable batteries of different
capacities.
• If you do not plan to use the recorder
for several days, or if you plan to use
only AC or vehicle battery power,
remove the batteries. Batteries can
leak chemicals that can destroy elec-
tronic parts.
1. Slide the battery compartment cover
in the direction of the arrow until it
stops, then lift up the cover.
Caution: The battery compartment
cover is attached to the recorder. Do
not try to remove it.
2. Place the batteries in the compart-
ment as indicated by the polarity sym-
bols (+ and –) marked inside.
3. Replace the cover.
Warning: Dispose of old batteries
promptly and properly. Do not burn or
bury them.
Using AC or DC Power
To power the recorder from an AC outlet
or your vehicle’s battery power, you need
an AC or DC adapter and an Adaptaplug
