Features and benefits, Bus interface, Connectors – Rosewill RC604 User Manual
Page 2: Package contents, System requirements, Hardware installation, Driver installation
2 Port eSATA PCMCIA Card
RC604
User Manual
Features and Benefits
z
Silicon Image SiI 3512 chipset
z
Compliant with Serial ATA Specifications rev. 1.0
z
PCMCIA CardBus Interface with Power Management
z
Provides two independent channels to support to two Serial ATA drives
z
Support Serial ATA data transfer rates up to 150MB/sec
z
Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard disk drives
Bus Interface
z
32-bit PCMCIA Type II
Connectors
z
2 x external eSATA connectors
Package Contents
z
1 x Serial ATA CardBus Adapter
z
1 x Manual
z
1 x Driver CD
System Requirements
z
Windows 98SE/ ME/2000/XP 32/64, Vista 32/64 & Linux
z
Available CardBus Type II Slot
Hardware Installation
General instructions for installing the card are provided below. Since the design of system may vary, refer to your system’s reference manual for
further information, if needed.
1.
Power off your notebook computer.
2.
Insert the Serial ATA CardBus Adapter into the Type II PC Card slot of your notebook computer. Make sure it is inserted all the way in for a
solid connection.
3.
Power on your notebook computer.
Driver Installation
For Windows® 2000
1.
At Found New Hardware Wizard, click Next.
2.
Select Search for a suitable driver for my device(recommend) then click Next.
3.
Insert the driver CD, check CD-ROM drives, uncheck the other boxes, click Next, then click Next again.
4.
If the Digital Signature Not Found message appears, click Yes. Our driver has been thoroughly tested for stability and compatibility.
5.
Click Finish.
For Windows® XP