Rayming v1.0 - Manual (Page 7)

GPSTrackP - TT-300
4. INSTALL THE USB DRIVER & TRIPTRACER SOFTWARE
Insert the Driver Installation CD-ROM into your PC.
Your PC’s Autorun feature should start the installation process upon insertion of the CD-ROM and
install the USB driver into the default directory C:\Program Files\TripTracer\USB Driver, however if your
PC’s Autorun feature has been disabled, select the SETUP.EXE file on the CD-ROM to manually start
the installation process.
With the driver loaded, insert the TripTracer’s USB plug into the USB port of your PC and when
prompted by your computer’s Operating System (O/S) for the driver, click HAVE DISK and browse to
the location where it was saved (default C:\Program Files\TripTracer|USB Driver). The installation
process will automatically select and load the correct USB driver that matches with your O/S version.
The installation process will have also copied the TripTracer download utility and placed a shortcut icon
on your desktop (TripTracer) to extract the recorded data from the TripTracer unit.
5. SET-UP TO RECORD GPS IN YOUR VEHICLE
Select a location within the vehicle to place the TripTracer so it will not interfere with driving visibility or
vehicle controls. Use the included hook & loop tape to secure the unit to a suitable and safe mounting
area, preferably so that the LED indicators will be visible.
Place the GPS antenna in a location where it will have a clear view to the sky, such as on the
dashboard or rear package tray. Route the antenna cable back to the TripTracer and connect it to the
threaded antenna jack. For your safety, take care to route all cables away from shifters, pedals,
accessory controls and mechanisms.
Fig. 1: Connect end of antenna to TripTracer’s antenna port
PAGE 7 OF 14
UG-TT300 (061003)