RocketFish RF-BTAPDT - Manual (Page 10)

10
8 When a Bluetooth keyboard is detected and the
following Security Setup screen appears, use the
connected Bluetooth keyboard to type the digits shown
on the screen, then press Enter. The keyboard is
connected.
Note : The Bluetooth security code is randomly generated
each time.
Connecting other Bluetooth devices
To connect Bluetooth devices such as printers, modems, and PDAs:
1 See the guide that came with your Bluetooth device for
instructions on making them able to be seen by the
computer (in “discoverable mode”). Often this involves
just turning on the device and pressing a Connect button.
RF-BTAPDT_08-1733 ENG.fm Page 10 Thursday, October 16, 2008 2:31 PM