Radio Shack 9" COLOR TV/VCR COMBO 36 - Manual (Page 21)

21
• To quickly change the displayed setting,
hold down REW/ or F.FWD/ .
• If you do not press REW/ or F.FWD/
within 5 seconds, the displayed setting
disappears. Start over at Step 2.
5. Either wait 5 seconds or press MENU to
exit.
USING MUTE
To temporarily turn off the Model 36’s sound,
press
MUTE . MUTE and the volume level bar ap-
pear.
To restore the sound to the previous level, press
MUTE again. To restore the sound and change
its level, press VOLUME s or t.
USING CHANNEL RETURN
The Model 36’s channel return function lets you
quickly switch between channels you tuned (in-
cluding
AUX , see “Viewing an External Device”)
by using the remote control’s number buttons.
Repeatedly press CHANNEL
RETURN on the remote con-
trol to switch from the channel
you are watching to the previ-
ous channel you tuned, and
vice versa.
VIEWING AN EXTERNAL
DEVICE
To view the signals from an external device you
connected to the audio/video input jacks on the
front of the Model 36 (see “Connecting an Exter-
nal Device” on Page 13), do either of the follow-
ing:
• Enter 00 using the remote control’s num-
ber buttons.
• Select one channel higher than the highest
programmed channel or one channel lower
than the lowest programmed channel.
AUX appears on the TV screen.
Setting REW/ F.FWD/
BRIGHT to
decrease to
increase
CON-
TRAST to
decrease to
increase
COLOR toward
pale toward
brilliant
TINT toward
purple toward
green
SHARP-
NESS toward
soft toward
clear
REW
STOP
F.FWD
RECORD SPEED
TV/VCR COMBINATION
MODEL 36
PAUSE/STILL
T-PROG. CLEAR CHANNEL RETURN
MEMORY RESET
COUNTER
16-429.fm Page 21 Tuesday, July 20, 1999 3:50 PM