RCA RMW1143 - Manual (Page 10)

SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
· After total time elapsed, the system will sound beeps with END in display. And the beeps will continue
to sound every two minutes automatically until the door is opened or any pad is touched.
S
ETTING THE CLOCK
1.
2.
3.
Touch CLOCK pad.
Use the number pads to enter the correct
time. You must touch at least three numbers
to set the clock (one for hour and two for
minutes).
Touch CLOCK pad again.
NOTE:
When the oven is first plugged in or when power
resumes after a power interruption, the display will
show ENTER CLOCK TIME. If you prefer to not
have the clock displayed, touch RESET.
·You can check the clock time while cooking is in
progress by touching the CLOCK pad.
S ETTING THE OVER TIMER
1.
2.
3.
Touch TIMER.
Enter the amount of time by touching the
number pads. Digit time is in minutes and
seconds and set left to right. Set one digit (a
5 for 5 seconds) or up to four digits (2405 for
24 minutes, 5 seconds).
Touch START/STOP.
NOTE:
·Time countdown can be seen in display for 5
seconds before clock or cooking time is returned
to display.
·Touch TIMER and then touch RESET to cancel
TIMER during timing process.
S ETTING A COOKING PROGRAM
A. One-stage Cooking
1.
2.
3.
Use the number pads to set a cooking time.
You can set a cooking time from one seconds
to 99 minutes and 99 seconds.
If you want to set a power level other than
100% power, touch POWER, then use the
number pads to enter the power level.
Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
Number pad Cooking power
1、0 100%
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
0 0%
B. Two-stage Cooking
Some recipes require different stages of
cooking at different temperatures.
1.
2.
3.
SET STAGE 1:
Follow steps 1 and 2 in “One-stage Cooking”. DO
NOT TOUCH START/STOP
SET STAGE 2:
Touch COOK then enter proper cooking time and
(lower) power level. (Most 2-stage recipes use
lower power for second stage.)
Touch START/STOP.
O O P P E E R R A A T T I I O O N N I I N N S S T T R R U U C C T T I I O O N N S S
9