Roberts Radio RC9907 User Manual
Page 16
15
Cleaning the Heads
The binder and oxide from magnetic tapes can accumulate on the pinch
roller (A) the capstan shaft (B) and also the heads (C and D). This will impair
the sound quality.
To clean these parts proceed as follows:-
1. Turn off the power to the unit.
2. Press the Stop/Eject button (3).
3. Press the Play button (6) and the heads will be clearly seen.
4. Clean the surfaces (A, B, C, D) with a lint free rag or cotton swab soaked
in alcohol. Press the stop/eject button as soon as cleaning is over.
General
Do not allow this unit to be exposed to dripping or splashing, water or
steam. It is recommended that the FM band be used wherever possible
as better results in terms of quality and freedom from interference will
usually be obtained than on the MW or LW bands.
•
The name plate is located at the underside of the radio cassette
recorder.
A
B
C
D
•
No objects filled with liquids such as vases, shall be placed on
the radio.
•
It is recommended to operate the product such that there is a minimum
distance (10cm recommended) to adjacent objects in order to
ensure good ventilation.
•
The ventilation of the product should not be restricted by covering
it or its ventilation openings with items such as newspapers, table-
cloths, curtains etc.
•
No naked flame sources such as lighted candles should be placed
on the product.
•
It is recommended to avoid using or storing the product at extremes
of temperature. Avoid leaving the unit in cars, on window sills in
direct sunlight etc.
RC9907 Issue 3.pmd
1/26/2007, 1:35 PM
16