Razor MINI ELECTRIC CHOPPER 15130760 - Manual (Page 3)

Remove contents from box. Remove the foam separators that protect the components from damage during
shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have
occurred during shipping. Because the electric chopper was 95 percent assembled and packed at the
factory, there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 30 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 3 for charging information).
BEFORE YOU BEGIN
2
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR
RAZOR ELECTRIC CHOPPER.
The electric chopper has been
built to certain Razor design
specifi cations. The original
equipment supplied at the time
of sale was selected on the
basis of its compatibility with the
frame, fork and all other parts.
Certain aftermarket products
may or may not be compatible.
Required Tools
Some tools may be supplied; however, we recommend the use of mechanic’s grade tools. Use the
supplied tools only as a last resort.
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com
or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacifi c Time.
5mm and 6mm
hexagonal key wrenches
(included)
Bicycle-style tire pump
for Schrader valve tires,
with pressure gauge
Infl ation valve adapter/
extender (supplied
inside hand grip)
Kick
Stand
Charger
Brake Lever
Brake Lever
Adjuster
Wheel
Tire
Speed Control
Front Fork
Infl ation Valve
Charger
Plug
Charger
Port
Charger
Port
On/Off
Switch
Phillips screwdriver