Ricoh S10 24-72MM F2.5-4.4VC - Manual (Page 28)


When [Lens Attached] is selected:
When the power is turned on with a conversion lens attached, or when a
conversion lens is attached, the conversion lens type selection screen will
display. Press the Fn1/Fn2 buttons to select the desired setting and then
press the MENU/OK button. A symbol indicating the conversion lens type
is displayed momentarily at the center of the picture display, and then a
smaller symbol is displayed at the lower right of the picture display.
Caution ----------------------------------------------------------------------------------
• When [Conversion Lens] is set to [TELE[TC-1]], even if the wide conversion
lens (DW-6) is attached, the camera will recognize the attached lens as
the tele conversion lens (TC-1). In addition, the opposite will be the same.
• When a lens with a different [Conversion Lens] setting is attached,
shooting functions will not operate properly.